Do you know how to install dual systems using a USB flash drive? Many users are not familiar with how to operate it. Here I will introduce you to the method of installing dual systems on ASUS t100ha. The tool is a USB flash drive. We are installing a win10win8 dual system. If you want to know the specific operation, you may wish to read the following in detail.
1. Make a USB boot disk in advance and put the win10 and win8 images in the USB disk. Insert the u boot u disk into the computer, restart and quickly press the boot shortcut button to boot the u disk into the u boot main menu interface, select run win8pe menu and press Enter to enter the u boot pe system,
2. In the pop-up u start pe installation tool, select the win10 image file to install in the c drive, click the OK button,
3. The reminder program will Perform the restore operation, check the Restart after completion check box, and click the OK button,
4. Restart the program installation process after restoration, wait until the installation is completed, and set up After general settings, the win10 system is installed,
5. Repeat steps 1-2 to save the win8 system image file in a partition other than the c drive. Here, select the d drive and click OK.
6. A reminder box will pop up to perform the restore operation. At this time, you must remove the check box for restart after completion, and then click OK,
7. After the restoration is successful, directly click the start icon in the lower left corner of the win8pe desktop, and then click Boot Repair→NTBOOT Boot Repair Tool,
8. During the boot Just click [1. Automatic repair] in the repair tool to repair the system,
9. Finally, restart the computer and click windows 8 pro x64 in the displayed interface. Slow Quickly complete the installation of win8 system
The above is the installation of win10win8 on ASUS t100ha After understanding the above tutorials on how to operate the system, do you still find it difficult to install dual systems? If you are interested, you can give it a try.